Horiba Laqua Twin EC-33 Meter
The only pocket meter that directly measures conductivity and total dissolved solids (TDS) in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
Conductivity Range & Resolution
0 to 199 µS/cm: 1µS/cm
200 to 1999 µS/cm: 1µS/cm
2.00 to 19.99 mS/cm: 0.01 mS/cm
20.00 to 199.9 mS/cm: 0.1 mS/cm
TDS Range & Resolution
0.0 to 99.9 ppm: 0.1 ppm
100 to 999 ppm: 1 ppm
1000 to 9990 ppm: 10 ppm
TDS Curves
TDS Factor (0.4 – 1.0), EN 27888, 442, NaCl
Conductivity Calibration Points
Up to 3
Accuracy
±2% full scale (0 to 19.99 mS/cm)
±5% full scale (20.0 to 199.9 mS/cm)
Temperature Display
0 to 50.0 °C
FEATURES:
- Minimum sample volume: 0.12ml
- Up to 3 calibration points
- Conductivity, TDS, and temperature display
- Auto range
- Auto calibration
- Auto standard recognition: 1413µS/cm, 12.88mS/cm, 111.8mS/cm
- Auto temperature compensation: 2%/ºC fixed
- Temperature calibration: 5 to 40.0 ºC
- 4 Total dissolved solids curves: TDS Factor 0.4 to 1.0, EN 27888, 442, NaCl
- Auto stable / auto hold measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Materials: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
